固体超强酸催化下的醛酮自身缩合及其溶剂效应的研究

研究了在三种固体超强酸催化下醛(酮)自身的羟醛缩合反应,系统考察了反应时间,催化剂用量等因素对反应的影响,优化了反应条件.同时,对该反应的溶剂效应进行了研究.结果表明,当催化剂用量为2 g/1 mol醛(酮),反应5 h,转化率可达40%,溶剂对该反应有明显的抑制作用.超强酸对各种醛都具有较好的催化活性,其催化醛类化合物自身缩合的转化率都在48%以上,选择性在95%以上,证明固体超强酸对该缩合反应有较好的催化活性和选择性.     

苯甲酰基修饰的吸附树脂对对甲苯胺的吸附机理研究

合成了用苯甲酰基修饰的新型吸附树脂ZH-03和ZH-04,同时研究了它们和AmberliteXAD-4对不同温度下水溶液中对甲苯胺的静态吸附和脱附性能,并对吸附机理进行了探讨。结果表明,经化学修饰后的树脂ZH-03和ZH-04对水溶液中对甲苯胺的吸附过程在合适温度时存在化学络合吸附作用,对吸附剂进行苯甲酰基修饰可以提高吸附剂对水溶液中对甲苯胺的吸附容量。     

室温制备高合金化Pt-Ru/CMK-3催化剂及其对甲醇的电催化氧化

通过低温络合反应制备了高分散高合金化的Pt-Ru固溶体, 并将其均匀地担载在有序介孔碳CMK-3上, 以形成二元复合金属催化剂. XRD谱图表明,fcc结构的Pt原子部分被hcp结构的Ru原子取代形成置换固溶体， 而且几乎没有未形成合金的Ru存在. TEM和XRD研究结果表明， Pt-Ru/CMK-3催化剂中Pt-Ru合金粒子的平均粒径为27 nm, 且具有良好的均一度. 还研究了催化剂对甲醇的电催化氧化性能, 并与E-TEK公司同类催化剂进行了对比, 研究结果表明, Pt-Ru/CMK-3催化剂具有较大的电化学活性面积, 对甲醇的电催化氧化性能和抗CO中毒能力明显优于其它同类催化剂.     

(EnH2)2Ge2S6的合成与结构表征

用溶剂热方法制备了(EnH2)2Ge2S6单晶.单晶X射线衍射分析结果表明,(EnH2)2Ge2S6属单斜晶系,P2(1)/n空间群,晶胞参数a=0.67125(5)nm,b=1.12290(4)nm,c=1.07518(4)nm,β=92.288(2)°,Z=2.利用DSC及TG分析研究了其热稳定性,结果表明,该化合物在200℃以下能够稳定存在.     

Synthesis, Characterization and the Effect of Glucose-lowering of Guanidino Acid Oxovanadium（Ⅳ） Complexes

Two guanidino acid oxovanadium(Ⅳ) complexes have been synthesized. Preliminary tests in vivo have shown that the two title complexes all display lowering glucose activity in vivo to STZ-rats. The effect of glucose-lowering of guanidino acetic acid oxovanadium(Ⅳ) complex in vivo is higher than that of guanidino propanoic acid oxovanadium(Ⅳ) complex.     

超高效液相色谱-串联质谱法测定白芷中51种禁用农药的残留量

将白芷药材粉碎至通过孔径为(250±9.9)μm的网筛,并称取此白芷粉末样品2.00g于聚丙烯管中与水10mL混匀,再加入含1%(体积分数)乙酸的乙腈10.0mL,涡旋1min后加入无水硫酸镁4g和乙酸钠1g,剧烈振荡3min,离心5min,取其上清液5.0mL置于已盛有无水硫酸镁900mg、N-丙基乙二胺(PSA)450mg和硅胶300mg的净化管中,剧烈振荡5min使净化完全,离心5min。移取上清液3.0mL于40℃水浴中减压蒸缩至近干。加入50μg·L^-1的磷酸三苯酯内标溶液300μL,加入乙腈定容至1.0mL,经0.20μm滤膜过滤,取其滤液,按仪器工作条件进行超高效液相色谱-串联质谱法分析。选用Eclipse Plus C18色谱柱和以不同比例的(A)含10mmol·L^-1甲酸铵的0.1%(体积分数)甲酸溶液和(B)乙腈的混合液为流动相,按梯度洗脱程序对白芷中可能残留的51种禁用农药进行色谱分离,并在电喷雾离子源正、负离子(ESI+和ESI-)电离方式和动态多反应监测(dMRM)模式条件下进行串联质谱法测定。采用基质匹配标准曲线法定量。51种农药的质量浓度在一定范围内与其对应的峰面积呈线性关系,并测得其检出限(3S/N)为0.3~5.0μg·kg^-1。标准加入法回收试验的结果显示,其中大部分农药的回收率在71%以上,测定值的相对标准偏差(n=6)均小于20%。按此方法分析了70批白芷样品,共检出16种农药,其中甲拌磷亚砜的检出率达95%,最高检出量为15.2μg·kg^-1;甲拌磷砜和毒死蜱的检出率均为10%,最高检出量依次为3.5,45.0μg·kg^-1,其余13种农药的检出率均低于5%,且检出量均较低。     

Optimized Separation of Nine Xanthones by Microemulsion Electrokinetic Chromatography

A microemulsion electrokinetic chromatography method has been firstly used for the separation of the therapeutically important xanthones from Securidaca inappendiculata. The separation of the nine xanthones was systematically optimized with respect to pH, composition of microemulsion,addition of cyclodextrins, applied voltage and column temperature. Baseline separation was successfully achieved for the nine xanthones, which was also compared with that by micellar electrokinetic chromtography.     

桥联双（甲巯咪唑）化合物的合成和配位性能

研究了桥联双(甲巯咪唑)化合物(Ⅰ_a—Ⅳ_a、Ⅰ_b)的合成和配位性能。UV谱显示Ⅰ_a—Ⅳ_a与UO_2~(2+)离子(硬酸)配位,溶液中形成3:1的配合物。Ⅰ_b与Hg~(2+)、Au~(3+)离子(软酸)配位形成2:1的配合物,用CNDO/2方法计算了各配体分子中原子净电荷密度和HOMO、LUMO能量。     

Ce0.8Y0.2O1.9-Ca3(PO4)2-K3PO4复合电解质在中温区的质子导电性及在常压合成氨中的应用

A precursor of Ce_0.8Y_0.2O_1.9(YDC) solid electrolyte was synthesized by the gol-gel method. YDC and phosphates powders were prepared by mixing the YDC and phosphates according to different weight ratios. The mixtures of the YDC and binary phosphates were ground and sintered at 1 400 ℃. The proton conductivity in solid electrolyte of the sintered samples was examined using electrochemical methods at 400～800 ℃. Ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in the solid state proton conducting cell reactor. The optimal condition for the ammonia production was determined. The result indicated that composite electrolyte of 80wt% YDC: 20wt% binary phosphates as proton conductor could obtain the highest ionic conductivity and ammonia production rate among the four samples, the rate of evolution of ammonia was up to 9.5 × 10^-9 mol·s^-1·cm^-2.     

A New Kind of Void Soap-free P（MMA-EA-MAA） Latex Particles

Soap-flee P(MMA-EA-MAA) particles with narrow size distribution were synthesized by seeded emulsion polymerization of methyl methacrylate (MMA), ethyl acrylate (EA) and methacrylic acid (MAA), and large voids inside the particles were generated by alkali posttreatment in the presence of 2-butanone. Results indicated that the size of void and theparticle volume were related with the amount of 2-butanone. The generation mechanism of voids was proposed.